200 Oil Catch Can Kit For Mitsubishi Triton ML MN Challenger 4D56 2.5L 2006-2015

200 Oil Catch Can Kit For Mitsubishi Triton ML MN Challenger 4D56 2.5L 2006-2015

Features:
- With a By-Pass Valve Integrated into the Lid & Crank Case Pressure Regulation Valve (Very Important)
- Same Paper/Cotton Filter As Original Design
- Cotton Filter Is Easily Serviceable Without Disconnecting Any Hoses
- Strong & Light Plastic Construction
- Low-Pressure Loss, No Electrical Energy Required
- 25mm Openings In And Out
- Universal For Crankcase Ventilation ( Will fit any vehicle up to 250 kW )
- Specifically Designed To Accommodate The Latest Generation Of Turbo-Charged Engines
- Allows Flexible Installation Locations On The Engine Or In The Engine Compartment
- 25mm Openings In And Out, Also Has A 12.5mm Oil Return ( Allows Clean Oil To Drain Back To The Sump ​
- Separate Air And Oil Vapor By Using A Strategy To Fling Heavier Oil And Water Particles Outward To The Sides Of The Can
- Pressure Vent In Cap To Prevent Over-Pressure In The Crank Case
- Vacuum Limiting Valve To Regulate Vacuum In The Can
- Highly Adjustable Mounting Bracket Can Be Swiveled 180° Around Can
- Filter The Air From Your Crankcase And Separate Harmful Oil From Your Inlet System Stops Oil from Entering The Turbo And keep the Inlet Track Free From Sludge
- Highly Efficient Oil Separation As A Closed And An Open System ( Providing Ideal Protection For The Turbocharger And Other Components Installed Downstream )
- Less Motor Oil Consumption In Comparison ( Less Efficient Separators Or Conventional Open Systems )
- Fittings Are Not Removed During Element Maintenance ( A Cap At The Top Allows Full Access Inside W/o Disconnecting A Single Hose )

Fitment:
- Fit For Mitsubishi Triton ML MN / Challenger 2.5L DI-D 4D56 Common Rail, 2006-2015
- 130 KW 4WD Models Only

Package:
- 1 x Oil Catch Can with Cotton Filter Element
- 1 x Stainless Steel Filter replacement
- 1 x Stainless Steel Bracket
- 1 x Top Hose
- 1 x Bottom Hose
- 1 x Drain Kit

SKU: OCANKIT-003