Transmission Centre Bearing Spacer Kit Suit Gen 1 Ford Ranger/Mazda BT50 2006-2011

Transmission Centre Bearing Spacer Kit Suit Gen 1 Ford Ranger/Mazda BT50 2006-2011

The Roadsafe Transmission Spacer Kits provide a fix to aid in controlling the driveline vibration and noise after a lift is installed.

TSSGQ – Nissan Patrol

The Patrol Transmission Spacer Plates fit neatly between the transmission plate and the chassis and work by spacing down the driveline, thus reducing the driveline angle affected by the lift. The Roadsafe kit includes four precision cut 6mm spacer plates and fitting hardware to suit (extended bolts). The four spacers allow you to run either 6mm or 12mm spacers depending upon your lift.

TSS001 – Ford Ranger/Mazda BT50

The Ranger/BT50 centre bearing spacers are applied to the u-shaped cage that holds the centre bearing into position and effectively lowers the cage, and centre bearing, down to take the angle out of the pinion. The kit is supplied complete with 12 x 3.9mm spacer washers to suit the spacing requirement identified (from 3.9mm to 23.7mm), depending upon your lift. All lift kits quoted for Ford Ranger/Mazda BT50 should include a Centre Bearing Spacer Kit because driveline vibration can be experienced even with the smallest lifts. Tail Shaft Spacers are required on Patrols and Landcruisers when you have a large amount of lift, and the tail shaft is in danger of separating at the slip joint. The Tail Shaft Spacer mounts between the tail shaft flange and the diff flange. The kit includes longer high-tensile bolts necessary for installation.

Is your Manual ML Triton (06-on) suffering from significant driveline vibration following a suspension lift? This is because the Manual ML Triton has a two-piece driveshaft with a centre bearing. Your mate in the Auto ML Triton, with the same lift, will not have the same issues because the Auto versions have a single-piece driveshaft. The Roadsafe 13.25mm Diff Spacer is fitted between the rear driveshaft and the diff, lowering the bearing by 5-8mm, and compensates for the absence of a slip joint in the drive shaft prolonging the life of the Centre Bearing. In extreme cases, it will not fix vibration issues. Roadsafe offers a broad range of Tail Shaft Spacers for various applications.

Suits Lift 2"+ - Transmission Centre Bearing Spacer Kit Suit Gen 1 Ford Ranger/Mazda BT50 2006-2011

SKU: TSS006