AMI FUSE BOX SUB PANEL BLUE SEA SYSTEMS 100AMP MAX 32 VOLTS BLADE FUSE

$44.00

Product Code: ORC_OLAMM0M0
Availability: In Stock

---

Cooper Bussmann, SUB PANEL , FUSE PANEL


 

• Accepts industry standard AMI fuses from 30 to 200 AMPS.

 

• Pre-loaded with 2-100 AMP AMI fuses. Additional 50, 80, and 100 AMP fuses available below

 

• Ratings: Maximum total combined rating is 400 amps continuous*

 

• Temperature: -40degC (-40F) to 85degC (185F)

 

• Termination: Input Module: Stainless Steel 5/16-18 stud and keps nut

 

• Fuse Module: Stainless Steel #10-32 studs and keps nuts

 

• Torques: Mounting: 22in-lbs (2.5 Nm)

 

• Fuse Module: 39.8in-lbs (4.5N.M)

 

• Input Module: 75in-lbs (8.5N.M)

 

• Material: Housing: HTN black UL-rated 94-V0 thermoplastic material

 

• Cover: Red Santoprene cover for protection from accidental shorts

 

• Studs: Stainless Steel

 

• Dimensions (L X W X H) 3.25 X 3.25 X 1.13 inches

 

• 1 inch between mounting holes

* Based on numerous variations possible between # of LMI poles, fuses selected, input wiring, and output wiring, all applications should be tested by the installer to verify the product meets their expectations. Housing must not exceed 130 degrees C.

Cooper Bussmann, SUB PANEL , FUSE PANEL


Accepts industry standard AMI fuses from 30 to 200 AMPS.

Pre-loaded with 2-100 AMP AMI fuses. Additional 50, 80, and 100 AMP fuses available below

Ratings: Maximum total combined rating is 400 amps continuous*

Temperature: -40degC (-40F) to 85degC (185F)

Termination: Input Module: Stainless Steel 5/16-18 stud and keps nut

Fuse Module: Stainless Steel #10-32 studs and keps nuts

Torques: Mounting: 22in-lbs (2.5 Nm)

Fuse Module: 39.8in-lbs (4.5N.M)

Input Module: 75in-lbs (8.5N.M)

Material: Housing: HTN black UL-rated 94-V0 thermoplastic material

Cover: Red Santoprene cover for protection from accidental shorts

Studs: Stainless Steel

Dimensions (L X W X H) 3.25 X 3.25 X 1.13 inches

1 inch between mounting holes


* Based on numerous variations possible between # of LMI poles, fuses selected, input wiring, and output wiring, all applications should be tested by the installer to verify the product meets their expectations. Housing must not exceed 130 degrees C.